Ampera

Lab · free

From classic wiring to the smart home, one lesson at a time.

Nine short lessons you operate yourself: press, watch what the circuit does, read why. No account, no payment, in the browser or on the phone.

Open the Lab in the app

How a lesson works

  1. You press a button on the drawing: a switch, a fault, one more camera.
  2. The drawing changes and one sentence says what happened and why.
  3. Nothing is saved and nothing touches your project: you can try anything.

Classic wiring

The lesson «Double switch: two lamps from one box» in the Ampera Lab

Double switch: two lamps from one box

One phase comes in, two switched wires go out: each rocker has its own lamp.

Open the lesson

The lesson «Three control points: intermediate switch» in the Ampera Lab

Three control points: intermediate switch

Two two-way switches at the ends and an intermediate switch in the middle: the lamp changes from any of the three.

Open the lesson

The lesson «Staircase timer» in the Ampera Lab

Staircase timer

A push-button starts the timer; the light goes off by itself.

Open the lesson

The lesson «Roller shutter: up, down, never both» in the Ampera Lab

Roller shutter: up, down, never both

The motor has two phase wires, one for each direction. The actuator never powers both.

Open the lesson

Protection

The lesson «Circuit breaker and residual-current device» in the Ampera Lab

Circuit breaker and residual-current device

Two devices, two jobs: the breaker watches how much current flows, the RCD watches whether all of it comes back.

Open the lesson

New technology: KNX

The lesson «KNX: the button and the lamp are linked by an address» in the Ampera Lab

KNX: the button and the lamp are linked by an address

The button does not cut the phase: it sends a telegram on the bus. Whoever listens to that group address reacts.

Open the lesson

The lesson «Dimming: short press, long press» in the Ampera Lab

Dimming: short press, long press

The same button does two things: a short press switches, a long press changes the brightness.

Open the lesson

The lesson «Scenes: one button, several things at once» in the Ampera Lab

Scenes: one button, several things at once

A scene is a remembered state of several devices. One telegram calls it up.

Open the lesson

Network

The lesson «PoE: the power budget of the switch» in the Ampera Lab

PoE: the power budget of the switch

Cameras and access points take their power from the network cable. The switch has a total it cannot exceed.

Open the lesson

The lessons are for learning. The figures in them (6 A, 16 A, 30 mA, 60 W…) are examples chosen to show the principle, not design values: the real ones are set by a qualified electrician.

Then design a real job

The same application turns what the client asks for into a job file: plan, bill of materials, wiring, labels and installation steps.