Ampera

Guide

Guide

Ampera turns a smart-home job into a checked model and the documents you need on site. Ampera is a design guide: nothing here is a certification.

Start with the plan

The Plan shows the home as rooms with coloured pieces: each colour is a system (KNX, network, protection, shutters, air conditioning, Apple Home). The lines are the cables that leave the technical node. Tap a layer to hide or show it.

Tap a piece to see what it does, how it connects and a wiring diagram with wire colours. Tap a room to see everything in it. Below the plan, “Pieces in this project” lists every piece with its quantity. The plan is schematic, not to scale.

In Plan, “My plan” lets you upload a picture of your own floor plan and drag the pieces onto it (the image stays in this browser). “Technical” shows simple symbols (shape = system, code = piece), in colour: to print in black and white, choose that in the printer dialog. They are not the symbol set of a standard.

Two demo projects

Smart apartment is a complete project on a reference plan (not a client’s). Lighting installation is built from a real lighting installation and its panel and is compared automatically with the original documents.

Pick a project from the Projects list. The active one is marked.

Read the checks first

Checks lists what the model must pass: cable counts, protection against cross-section, port and PoE reserves, storage. A value that is not verified is a warning, never a verdict.

The room in 3D, detectors and more systems

In Design pick a room: it is a 3D scene you can rotate and zoom. Drag a piece to move it; the position is saved with the project and is for presentation, it never changes the documents.

The “Detector placement” view shows the room from above. Write the range of a motion detector from its datasheet and a circle appears; Checks says roughly how much of the room is outside the range. It is indicative.

In Checks every finding has “Choose the solution”: you pick, you see what changes, you confirm. Rating and cable section are never changed in bulk.

Alarm, optical fibre, door entry, access control and coaxial have their own editor in the room and in Project data › Parameters, and their own document. You write capacities, currents and losses from the datasheet; Ampera never invents them.

Change a parameter

In Parameters change a value (for example the number of cameras) and watch Checks react at once. Items and Spaces show what the model contains.

Get the documents

Documents generates the bill of materials, wiring list, labels, installation sheet, KNX plan and the schematic, all from the same model. If warnings remain you confirm the closing sheet first. A document follows the language of the app; the selector in Documents lets you pick another one, for the session only.

Keep your work

Export saves the project as a file and loads it back. The app keeps data only in this browser: export regularly, and always before clearing the browser data or changing device.

Your own job

In Parameters, “Project details” sets the name and the country (with its reference standard, to be verified). Documents follow the app’s language; another can be chosen in Documents. “New project from the reference plan” starts a clean copy of the reference apartment. With Ampera Pro you can keep several jobs: New project does not replace the current one, which stays in the Projects list; open it again from there. Without Pro there is one job at a time: a new one replaces it, after a copy is downloaded. Jobs are kept only in this browser, so download a backup from the settings from time to time.

Rooms can be added, renamed, resized and deleted in Spaces; devices are placed in rooms from Items (button “Rooms”). Network points per room are set in Spaces. Panel circuits are listed in Parameters; the breaker rating and the cable section are chosen by the authorised electrician, the app does not suggest them. For anything else (requirements, cabling details): save the project with Export, edit the JSON file and load it back. A change or a file that cannot run the checks is refused and the old project is kept.

In Parameters you also find: the job requirements (what the client asked for and what you propose, printed as the document «Job requirements»), the network cable category, the residual-current devices with the circuits under each one, and the sizes for the panel labels. The values of the RCDs are chosen by the authorised electrician; the app does not propose them. The document «Panel labels to measure» is drawn in millimetres: print it at 100% and measure the 100 mm check line before cutting. Lab has short interactive lessons (classic wiring, protection, KNX, PoE); their figures are examples, not design values.

To build the electrical panel, open Design, then Panel. Tap a module to change its name, type, rating, cable section or RCD. Ampera proposes the rating and the section from the country’s norm (marked “proposed”); the electrician ticks “Checked and confirmed” or changes the value. RCD type and sensitivity are chosen by the electrician only.

The Job file tab is the file you print or read on the phone: cover and contents, the complete diagram, the panel, the technical node, one page per room, the network map, the KNX line and the labels at real size. Print it from Documents (Job file). The cell size of the labels is set under Parameters.

What Ampera is not

Ampera is a design guide. Connection to the panel, commissioning and compliance remain the responsibility of an authorised electrician. For KNX it prepares addresses and files for ETS; it does not program devices.

Find the product and give the store a list

In Catalog pick a brand, then a series and a type, or type a name or a code in the search box (the magnifier). Tap “Add” to put a product in the shopping list; the list keeps brand, code and quantity, and can be downloaded as a CSV or printed to hand to the store.

The codes come from the manufacturers’ public catalogs and are not checked by an electrician: confirm the exact code and availability with the store. If a product is not in the list, add it as your own product. In Items you can choose a product for each piece of the project; the choice goes into the bill of materials and “Add the chosen products” puts them, with the project’s quantities, in the shopping list.

A quote for the client, and the file for ETS

In Catalog, open the shopping list and write your own price next to each item. Under the list, “Quote for the client” takes the client’s name, the labour lines and the VAT rate, then prints a quote with totals. Ampera has no price list and does not check prices: it adds up what you write, and it refuses to print while a line has no price.

In Documents, the KNX plan can be downloaded as “ETS file (XML)”: in ETS, right-click the group addresses and choose the import. The XML file keeps accented letters; the CSV file is the fallback. Neither has been checked by us in a real ETS yet: compare a few addresses after the import.

On site: photos, calculators, record and sharing

In Site photos (inside the job file) take a photo of each cable route before the wall is closed and tie it to a room; the site report prints them. Calculators gives voltage drop, minimum cable section, power and current, balance across phases and PoE budget: rough figures, the limits come from the standard and the electrician. In Documents the single-line diagram with the circuit table uses the length you write per circuit (or measure on “My plan” after setting its scale). In Catalog the quote can have options the client accepts or declines, a version without unit prices, and the client’s signature drawn on the screen. At handover, Commissioning record collects the ticked checks, your measurements, chosen photos and both signatures. Sync & share keeps a project on several devices: it is encrypted on your device and the key stays in the link.

Words you will meet

KNX: an open standard for building automation; devices talk over a dedicated two-wire bus. ETS is the software that programs them.

Group address: the “channel name” that links a button to a lamp on the KNX bus. DPT (datapoint type) says what kind of value it carries: on/off, dimming, temperature.

Matter: a common language that lets devices from different brands work with Apple Home, Google Home and others.

PoE (Power over Ethernet): power and data on the same network cable, for cameras and access points. The PoE budget is the total watts the switch can supply.

RCD (residual-current device, “differential”): a protection that cuts the circuit when current leaks to earth. Selectivity means the right breaker trips first.

Cable section: the copper cross-section in mm². It limits the breaker rating the cable can safely have.

Open the demo