Blog · 17 November 2026
Place the detectors on the room plan
A top view of each room with the detectors where you drag them, and the range you read from the datasheet.

Where a detector goes decides what it sees. Ampera now shows it on a plan.
What you see
Pick a room in Design and open “Detector placement”: the room seen from above, to scale, with the window on the north wall and the door on the west wall. Alarm detectors, presence and smoke detectors, cameras and contacts appear where they are in the 3D room.
Drag them
Drag a device with the mouse or a finger. Wall devices snap to the nearest wall, ceiling devices stay where you drop them, and the arrow keys nudge by 5 cm. The position is saved with the project and is for presentation.
The range comes from you
Ampera does not know your detector. Write its range from the datasheet and a dashed circle appears around it. Without a range there is no circle and no verdict.
The check
When some of the room is outside the range of the detectors that have one, Checks says roughly how much and proposes one more detector like the first. The figure is indicative: the real angle, the mounting height and the obstacles are in the datasheet.
On paper too
The alarm document includes the top view of every room that has alarm devices. Ampera is a design guide, not a certification.