Ampera

Blog · 17 November 2026

Door entry, access control, coaxial, alarm and fibre in one job

Five systems electricians are asked for besides lighting and sockets, each with its own checks and document.

A client who wants a smart home also wants the door to open, the TV to work and the alarm to be quiet. Ampera now covers these systems in the same job file.

Door entry

Door station, indoor units, lock and gate contact, per room. Checks: indoor units without a door station, a door station nobody can answer, more units than the system supports, supply current and voltage drop on the cable.

Access control

Readers, electric locks, exit buttons, door contacts and the controller. One check is about safety: a door with an electric lock must open freely from inside, and a magnetic lock also when the power fails. A lock without an exit button in the room gets a warning, and the rules of the country decide.

Coaxial TV and satellite

Antenna, dish, splitters and outlets. If you write the cable loss per 100 m and the loss of each splitter and outlet, Ampera gives the loss to each outlet and warns when it passes the value you accept. Without those figures it gives no number.

Alarm and fibre

The intruder alarm (zones, keypad, sirens, supply current, voltage drop) and optical fibre (loss budget, colour code) were added before and work the same way.

The same rule everywhere

Capacities, currents and losses come from your datasheets: the app does not know your system. The wiring it draws is typical and didactic; terminals, polarity and protocol belong to the maker. Ampera is a design guide, not a certification.

Open the demo ← All articles