Blog · 12 November 2026
Case study: a lighting job done with Ampera
A real job carried out by Domus Renov with Ampera: how the lighting installation of an apartment became a dossier you can carry to the site.

The job: the lighting installation of an apartment, carried out by Domus Renov with Ampera, built with a Hager board of 12 circuits behind three residual-current devices, with switches from several ranges, impulse relays and a smart-home bus alongside.
The problem
On a job like this the difficult part is not the idea but the wiring: which wire goes to which terminal of which device, in which order the cables enter the junction box, and what label goes on each end. Done from memory, it is slow and one mistake costs a day.
What the dossier gives
One large diagram split by zones, a page per room, the light controls wire by wire with the terminal of each device, the corrugated conduits in the order they enter the box, and printable labels for wires, cables, Wago connectors and relays. It reads on a phone on the site as well as on paper.
What Ampera does not claim
The dossier is generated from the project and every proposed value is marked as such. The connection to the board, the commissioning and the compliance with the standard belong to an authorised electrician. Ampera is a design guide, not a certification.